Microtest OMNIScanner2 User's Guide download pdf (Page 89)

6 - 11

OMNIScanner User Guide

Cable Trace

Tracer/Toner is a cable tracing function that assists in tracking cables

hidden in walls, ceilings, floors, or patch panels by generating a signal that

can be converted into an audible tone by Microtest’s Cable Tracer II (sold

separately) or any other equivalent tracing device.

1. Attach the end of the cable you want to trace to the OMNIScanner using

a patch cord and the Microtest Channel Adapter or the Microtest Link

Adapter. Make sure that the cable is not grounded, as a grounded cable will

weaken the signal.

A multi-tone trace signal will begin transmitting. To

enhance the signal, insert a grounding plug into the

ground jack located left of the DB-9 Serial Connec-

tor. A grounding plug is included in the optional

Cable Tracer II kit; you may use any grounding

cable that has a standard insulated phone tip plug.

2. To determine the cable path use the multi-tone

sound as a guide and simply trace along the wire

where the tone is loudest. The tracer needs to be within one foot of the

hidden cable.

Press ESC to exit the CABLE TRACE screen.

Office Locator

The Office Locator function allows you to find the termination of an office

cable drop from a wiring closet. It eliminates the need to trace cables

through walls and ceilings.

1. Connect the cable to be tested to OMNI

Scanner

2. Insert the RJ-45 Office Locator adapters into wall

outlets in the offices you wish to identify. You can

connect any or all of the twelve Office Locators

before beginning your test.

3. At the patch panel, run the Office Locator function

to identify, which office is connected to a given port.

1 2 ... 84 85 86 87 88 89 90 91 92 93 94 ... 132 133

No comments

Microtest OMNIScanner2 User's Guide Page 89